LEDTranslatedA clearer view of light.

Omnilux Contour Face

The Omnilux Contour Face is an LED face mask with 132 reported LEDs and wavelengths of 633 · 830 nm (red, near-infrared). Reported irradiance is ≈30 mW/cm². Session: 10 min. Reference price: €453.75.

Checked · Manufacturer source

Published specifications

Wavelengths
633 · 830 nm
Light bands
Red · Near-infrared
LED count
132
Reported irradiance
≈30 mW/cm²
Session
10 min
Fit
Flexible silicone
Power & controls
Rechargeable controller
Regulatory claim
FDA cleared for full-face wrinkles, manufacturer claim; CE · TGA as reported by LED Mask Specs
FDA 510(k) record
K191629, cleared 12 Sept 2019 (Possible match, unconfirmed). Record: “faceLITE”, Ismart Marketing Svcs, Ltd. Omnilux cites K191629, but the FDA record lists the device as “faceLITE” from Ismart Marketing, not as Omnilux Contour.Checked in the FDA database 31 October 2026
Estimated dose per session
≈18 J/cm² over 10 minReported irradiance × listed session time. A calculation from manufacturer claims, not a measurement.
Matching studies
6 of 15 summarised studies
Reference price
€453.75Manufacturer EU page, 31 Oct 2026
Data origin
Manufacturer irradiance, price and FDA claim; LED Mask Specs baseline

Source note

Manufacturer help centre specifies approximately 30 mW/cm² for Contour Face. The remaining baseline fields and reference price come from LED Mask Specs.

Manufacturer irradiance, price and FDA claim; LED Mask Specs baseline. Regulatory claims are reproduced with their source status; this is not a regulatory certification by LED Translated. Specifications are manufacturer-reported and were not independently measured.

Research using these wavelengths

Six of the 15 studies summarised on this site used a wavelength in every band this mask lists for that study. Matching wavelengths is not the same as matching dose, schedule or results.

Questions

Does the Omnilux Contour have near-infrared light?

Yes. It lists 830 nm near-infrared alongside 633 nm.

Does the Omnilux Contour have blue light for acne?

No blue wavelength is listed. Its reported wavelengths are 633 · 830 nm.

How long is a Omnilux Contour session?

The manufacturer lists 10 min. Follow the device’s manual for frequency and use limits.

Is the Omnilux Contour FDA cleared?

K191629 is the 510(k) record linked to it (possible match, unconfirmed), cleared on 12 Sept 2019. Omnilux cites K191629, but the FDA record lists the device as “faceLITE” from Ismart Marketing, not as Omnilux Contour.

How strong is the Omnilux Contour?

From its published irradiance (≈30 mW/cm²) and 10-minute session, the estimated dose is ≈18 J/cm² over 10 min. Recent mask trials used about 4–8 J/cm² per session; this is a calculation from claims, not a measurement.

Which studies used the Omnilux Contour’s wavelengths?

Six of the 15 summarised studies used wavelengths it lists, for example why red light may calm inflammation: the mechanism review (2017). A wavelength match does not mean the mask reproduces a study’s dose or results.

Compare side by side.

The Omnilux Contour next to each of the other nine, in the same fields.